Qualdent Bestwarm Dental Resin Composite Heater
Active Resin (AR) Heater Designed to Heat Composite Resins to Improve Flow
Original price was: ₹11,000.00.₹4,450.00Current price is: ₹4,450.00.
Description
Dental Resin Composite Heater is designed to heat the composite resin material, improve the flow performance of the adhesive, and can also be used as a manual device for heating bonding. AR Heat uses a precise circuit to control the heating module, so that the temperature tolerance is controlled at #1°C. Depending on the choice of material and personal preference,temperature can be set up to : 40degrees, 50 degrees and 70 degrees.
Dental resin composite heater consist :
- Main body
- Power adapter
- Temperature indicator light
- Turn on/off button
- Thermopreferendum button
- Power DC socket
Additional information
| Weight | 0.1 kg |
|---|
Features
Features
- According to your choice of material and personal preference temperature can be set up to: 40 degrees, 50 degrees and 70 degrees with 3 different indicators.
- The temperature can be controlled by the user.
- Can also be used as a manual device for heating composite.
- Easy handling.
Key Specifications
Key Specifications
TECHNICAL SPECIFICATIONS:
- Output: 15V DC 2A
- Power: 30W
- Height : 8.8cm
- Diameter : 7.6cm
- Temperature setting: 40±1℃, 50±1℃, 70±1℃
| TEMPERATURE | LIGHT COLOR | HEATING | Reach the undefined temperature |
| 40°C | White | White LED glisten | White LED normally on |
| 50°C | Green | Green LED glisten | Green LED normally on |
| 70°C | Red | Red LED glisten | Red LED normally on |
PRECAUTION:
- The resin composite material must tighten the lid of the syringe, preventing leakage material within the heating body.
CLEAN and DISINFECT:
- All the parts can be cleaned with disinfectant using dish cloth. Don’t put any parts immersed in any liquid cleaning and disinfection, don’t disinfect under high temperature and high pressure
Fault warning: 3 sets of indicator light glisten together: Temperature sensor failure.
Packaging
Packaging
- 1 x Resin composite heater
- 1 x Power adapter
- 1 x Instruction manual
- 1 x Heater Stand
Direction to Use
Direction to Use
STEP 1: After connecting to 15V Direct Current, three indicator lights (red, green and white) will be on. At that time, a composite heater can be used.
STEP 2: When users are using the heater, only the white light indicator lighter will be flashing, means the heater is working at 40°C. If you need to turn it off, push ON/OFF button again, (at that time, three indicator lights will be on) and the heater will stop heating.
STEP 3: Three working modes ( 40°C/ 50°C/ 70°C) can be chosen by users, according to their requirements.
STEP 4: After choosing one working mode, (taking 40°C for example) the indicator light will keep flashing when the temperature is below 40°C. Otherwise, the light will keep lighting. At the same time, you can choose another heating mode. If without any action on it, the heater will be on standby after 30minutes.
STEP 5: If you need to use it again, just push ON/OFF button again. And start heating.
STEP 6: The heater should be placed on smooth places.
STEP 7: Injecting, heating resin composite material by syringes, the heating mode can be chosen by the user.
Additional Info
Additional Info
- Country of Origin: Made in PRC
Warranty
Warranty
• Manufacturer warranty of 3 months is applicable to this product.
• Service and warranty are handled at manufacturer’s discretion.
• Qualdent will be liable to replace any faulty or unsatisfactory products.
• Qualdent will provide guaranteed assistance to the customer in registering a request to get the product replaced or serviced.
• The buyer acknowledges that products once sold will not be exchanged or taken back only if seal of the package or product is intact or unaltered or is not tampered with .
FAQs
FAQs
Question
Can this composite heater be used for heating composite compule fixed with dispensing gun?
Answer: Yes, the Qualdent Dental Resin Composite Heater can be used to heat composite compules fixed with a composite dispensing gun for optimal viscosity and application during dental restorative procedures.
Question
How can I maintain 60 or 68 degrees in this composite heater ?
Answer: The Qualdent Dental Resin Composite Heater has specific temperature settings built-in, offering options of 40 degrees Celsius, 50 degrees Celsius, and 70 degrees Celsius. There are no settings for maintaining a temperature of exactly 60 or 68 degrees Celsius.
Question
Warmed composite will damage my patient’s teeth and gums or will cause sensitivity ?
Answer: Studies have shown that using composite heated to 60°C results in a less than 1.0°C rise in pulpal temperature – lower than temperature increases from light curing, and far below the threshold for critical pulpal temperature increase.
Question
Warmed composite is sticky and more difficult to work with ?
Answer: Heating composite reduces its viscosity and improves flow, which in turn lowers the force necessary to extrude from the compule. This not only decreases hand fatigue, but also allows for faster, easier, more precise control when placing the material into areas with limited access. And because the composite is more flowable, it’s able to fill all the nooks and crannies of the cavity prep – enabling less invasive cavity prep with more unique geometries and improved adaption.
Question
What are the advantages of heating composite ?
Answer: Pre-heating composites improves their handling characteristics, increases flowability, reduces sorption and solubility, enhances marginal adaptability while reducing marginal gaps, and increases microhardness. It reduces the complications that can occur with dental composites, like polymerization shrinkage that can lead to shrinkage stress, in some types or composite without compromising the degree of conversion.
Question
What temperature do you heat composite ?
Answer: Regardless of how you heat your composite, it’s important to heat your material to at least 60°C (140 F) and place the material shortly after removing the composite from the heat source. As soon as two minutes after it’s been removed, composites loose approximately half of their heat.
Reviews (0)
Related Products
Precise, push-button control, slow-speed contra angle handpiece for accurate procedures
Reciprocating handpiece for hand files
Cordless high-powered, compact LED curing light
Dental Contra Angle Implant Handpiece 20:1
Fourth generation apex locator for accurate root canal length measurement
20:1 Contra Angle Dental Implant Handpiece
Reviews
There are no reviews yet.